Product ID:AQUAPON A COMPONENTS, 97-A
MSDS Date:01/09/1991
FSC:8010
NIIN:00N026516
MSDS Number: BNCVJ

PPG INDUSTRIES INC (WAS PTTTSBURGH PLATE GLASS CO)

ONE PPG PLACE
PITTSBURGH, PA 15272-0001
US

Emergency Phone: 412-434-3131

Info Phone: 412-434-3131

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 10-15%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

FILM FORMERS, RESINS AND ADDITIVES.

Fraction By Weight: 30-35%

CONC & INHALING CONTENTS CAN BE HARMFUL/FATAL.

RTECS: 9999999ZZ

TITANIUM DIOXIDE. ANIMALS INHALING MASSIVE QTYS OF

RTECS: 9999999ZZ

W/HUMANS INVOLVED IN MANUFACTURE OF PIGMENT INDICATE

RTECS: 9999999ZZ

OF TITANIUM DIOXIDE DUSTS FROM COATINGS IS VERY

RTECS: 9999999ZZ

ACETATE WHICH HAS BEEN SHOWN TO CAUSE ADVERSE EFTS

RTECS: 9999999ZZ

CUTTING ON SURFACES COATED W/THIS PRODUCT.

RTECS: 9999999ZZ

ALUMINOSILICATE; (ALUMINUM SILICATE)

CAS: 1327-36-2

Fraction By Weight: 25-30%

TALC, CONTAINING NO ASBESTOS; (MAGNESIUM SILICATE)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: 5-10%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 40-45%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

PIGMENTS

Fraction By Weight: 2-5%

ISOPROPYL ALCOHOL; (ISOPROPYL ALCOHOL, ANHYDROUS)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 10-15%

OSHA PEL 400 PPM;500 PPM STEL

ACGIH TLV: 400 PPM;500 PPM STEL

ETHANOL, 2-PROPOXY-; (ETHYLENE GLYCOL MONOPROPYL ETHER)

CAS: 2807-30-9

RTECS: KM2800000

Fraction By Weight: 10-15%

XYLENE

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 30-35%

OSHA PEL 100 PPM;150 PPM STEL

ACGIH TLV: 100 PPM;150 PPM STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL/FATAL IF SWALLOWED.
EYE:CAUSES SEVERE IRRIT. SKIN:MAY CAUSE MOD IRRIT. MAY BE ABSORBED
THRU SKIN. INHAL:VAPOR & SPRAY MIST HARMFUL IF INHALED. VAPOR
IRRITS EYES, NOSE & THROAT. RPTD EXP OS TO HIGH VAPOR CONCS MAY
CAUSE IRRIT OF RESP SYS & PERM BRAIN & NERVOUS SYS DMG. INTENTIONAL
MISUSE BY DELIB (ING 10)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:EYE WATERING, HEADACHES, NAUSEA, DIZZINESS &
LOSS OF COORDINATION ARE INDICATIONS THAT SOLVENT LEVELS ARE TOO
HIGH. REDNESS, ITCHING, BURNING SENSATION & VISUAL DISTURBANCES MAY
INDICATE EXCESSIVE EYE CONTACT. DRYNESS, ITCHING, CRACKING,
BURNING, REDNESS & SWELLING ARE CONDITIONS ASSOCIATED W/EXCESSIVE
SKIN CONTACT.

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
FOR AT LEAST 30 MIN. SKIN:REMOVE PROMPTLY BY WIPING, FOLLOWED BY
WATERLESS HAND CLEANER,SOAP & WATER. INHAL:REMOVE TO FRESH AIR.
APPLY ART F RESP & OTHER SUPPORTIVE MEASURES AS REQ. IF PERSISTENT
SKIN/EYE IRRIT, BRTHG DFCLTY, EXCESSIVE EXPOS TO CORR MATL,
INGEST,CNTCT POISON CONTROL CENTER, EMER ROOM/MD IMMED. HAVE MSDS
INFO AVAILABLE.

Flash Point Method:PMCC
Flash Point:50.0F,10.0C
Lower Limits:1.4%
Extinguishing Media:USE NFPA CLASS B EXTING (CO*2,DRY CHEM,UNIVERSAL AQ
FILM FORMING FOAM) DESIGNED TO EXTING NFPA CLASS IB FLAMM LIQ
FIRES.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
EQUIP.WATER SPRAY MAY BE INEFT.WATER SPRAY MAY BE USED TO COOL
CLOSED CNTNRS TO PVNT PRESS BUILD-UP & (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLOSED.ISOLATE FROM
HEAT,ELEC EQUIP, SPARKS & OPEN FLAMES.CLOSED CNTNRS MAY EXPLODE
WHEN EXPSD TO EXTREME HEAT. DO NOT APPLY ON (SUPP DATA)

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST, VERMICULITE/OTHER
ABSORB MATL & PLACE INT O CONTAINERS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG QTYS
IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS IB
FLAMMABLE LIQUIDS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COATING SYS,
READ MSDS FOR OTHER COMPONENT(S) BEFORE BLENDING AS RESULTING MIXT
MAY HAVE HAZ OF ALL ITS PARTS. CNTNRS SHOULD BE GROUNDED WHEN
POURING. AVOID FREE FALL OF LIQ IN EXCESS OF A FEW INCHES.

Respiratory Protection:OVEREXPOS TO VAPORS MAY BE PVNTD BY ENSURING
VENT CONTROLS, VAPOR EXHAUST/FRESH AIR ENTRY. NIOSH/MSHA APPROVD
(TC-23C) PAINT SPRAY/AIR SUPPLIED (TC-19C) RESP MAY ALSO REDUCE
EXPOS. DETERMINE TYPE OF A IRBORNE CONTAMINANTS FOR RESP USE.
Ventilation:PROVIDE GEN DILUTION/LOCAL EXHST VENT IN VOL, PATTERN TO
KEEP CONC OF INGREDS Protective Gloves:NITRILE/NEOPRENE RUBBER OR (SUPP DATA)
Eye Protection:CHEM WORK GOG/FULL LENGTH FSHLD .
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
IMPERMEABLE APRON CONSTRUCTED OF NITRILE/NEOPRENE RUBBER OR
POLYVINYL ALCOHOL.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
FIRE FIGHT PROC:POSS AUTOIGNIT/EXPLO WHEN EXPSD TO EXTREME HEAT. IF
WATER USED,FOG NOZZ PREF. EXPLO HAZ:HOT SURF. TOXIC GASES MAY FORM
WHEN PROD CNTCTD BY FLAME/HOT SURF. HAZ DECOMP PROD:INCLDG:CO, NO
*X. PROT GLOVES:POLYVINYL ALCOHOL GLOVES. VENT:LEL REMOVE DECOMP PRODS DURING WELDING/FLAME (ING 15)

HCC:F3
Boiling Pt:B.P. Text:180F,82C
Vapor Pres:<18 MM HG
Vapor Density:HVR/AIR
Spec Gravity:1.1-1.6
Evaporation Rate & Reference:<15 (BUOAC = 100)
Solubility in Water:<24%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACTERISTIC OF SOLVENTS
LISTED IN INGREDIENTS SECTION.
Percent Volatiles by Volume:<71

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING,BRAZING/FLAME CUTTING ON SURFS COATED W/PROD MAY
PRDCE FUMES (SUPP DATA)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF I/A/W
FEDERAL, STATE, PROVINCIAL & LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH APPROVED WASTE MANAGEMENT FACI LITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.